Car-go-round

As we hit Summer, I find my attention going in 100 directions at once. When you have many cars, each with small problems, and a house in mid-rehab, that scatter is probably that much worse. With the rehab work going on, I will have limited time to work on cars, but Boo has asked me to think about setting aside one day a week to it since I take such pleasure from it, and life can't always be about to-do lists, home construction and your job. So, today's post tries to bring some order to the car-chaos, with a hope that I will have some time to clown on one or more of these open items this summer.

Oliver

Oliver is the 1978 MGB. Some may look at Oliver like he was my mid-life crisis car. In truth, he was a car that could fit in the super-small garage I had and needed work. He was something I could work on that wasn't Hapy, the 1972 VW bus, and I could be out of the rain when I did it. Oliver definitely met that goal and I really needed something other than Hapy to wrench on for a while. The goal Oliver has not yet met is passing DEQ. So, he is not legally drive-able. Oliver's list of incomplete items is fairly short, though. I believe, he could pass DEQ today if the carb is adjusted right. He just needs another run through DEQ to see how close I am. He got a new battery for the move to the NewOldHouse, and since then he has sat under one of those 5L car covers with the battery disconnected.

Beyond DEQ, the heated seat circuit did not get completed, and there remains a leak under the windscreen on the passenger side. Perhaps most importantly the brakes are still spongey and I think it is because the brake master cylinder was not bled prior to install. I asked the guys at Les Schwab to do it when I bought a set of tires from them. They sold me the tires, failed to bleed the brakes, and that's why I now buy tires at Firestone. Anyway, I bought a brake bleeder kit, (and will document my process) and hope to get him to DEQ before this top-down season has really started.

Zed

Ah Zed, the 1978 Datsun 280ZX. After a spring and summer of bodywork, Zed still needs a lot. I won't rerun that history, but there was a lot of sanding and shaping. Then, I had that heroic drive from oldHouse to NewOldHouse, sitting on a toolbox for a front seat (See Zed Moves). Once parked, he got a 10x20 to sit under while we worked on the house. Well, the weather had other plans, lifting and tossing the canopy multiple times, putting multiple rubs and deep scratches into the paint (See Hello Windstorm, My Old Friend). So, Zed will need another round of sanding and painting. Now that I have seen the Eastwood 9mm in the sun, I am not as enamored with it. I see a slight olive green in that dark grey and the pitted finish is not to my liking at all. So, I will probably sand down below the paint to some degree, re-shoot the black primer and shoot a different color. Of course, the body kit is installed and it's not coming off. So, I will need to get creative to get good coverage down low. Now parked next to Oliver with a matching 5L car cover, they are twins. I do not expect to do much of anything on Zed this Summer.

 

Hapy

In the Phil and Friends post (See Phil and Phrends Road Report), I mentioned a few things that needed attention before the next drive in Hapy, the 1972 VW camperbus. The most glaring was the loss of the brake booster. I removed the hose from the booster and tested the vacuum on the booster unit. I applied 15 pounds of vacuum and over the course of a few minutes, it decayed a couple of pounds. To me, that is satisfactory. Then, I tested the vacuum on the hose I had just removed. It held no vacuum. So, I acquired and installed Gates vacuum hose. One quick test drive later, the brakes are good. I installed the cage for the stereo so it is well locked into the glove box install location. I also affixed a mount for the UltraGauge on the steering wheel support so the UltraGauge is directly below the speedometer now. I do not expect Hapy will have meaningful work done to him for the rest of the Summer. Instead, he will be set up for DrivewayFest between trips so we can enjoy our clubhouse-on-wheels. Hapy has been used a few times since we moved as my daily-driver when Boo needs to take Toyotruck somewhere. Every time, since we moved to the NewOldHouse, he has started right up. I mentioned the saga about towing him here. The starter swap-out was easy and the right fix (See Hapy Lives Again).

Nemo

Nemo (1997 Audi A4 Quattro) has left the fleet, enjoying a new lease on life in Idaho. See Fare Well, Nemo.

GoRo

GoRo (2009 Audi A4 Quattro) had a series of issues appear over last winter. First, the outer driver handle stopped working. So, to get in, you needed to reach through either from the passenger side or from the rear seat to get the door open. What a pain. Then, the battery started to misbehave, not holding charge. While looking for the charger studs, the hood latch broke. So, GoRo sat for most of the winter, until Boo got the hood latch repaired (she hired our friend Courtney at MobilePDX). Even Courtney doesn't want to touch the outer door latch, so we're not sure what we are going to do about that. I need to get the battery replaced, and then maybe I'll take it on. Either way, we are going to sell GoRo. We figure it hasn't been driven since last December, and we have been just fine without it.

ToyoTruck

Recall that Boo and I bought ToyoTruck (2005 Toyota pickup) from her sister. We had agreed to the price before the ice-storm sent the truck into a pole, damaging the passenger front corner. I replaced a bunch of things, but did not shoot the paint. The top of the truck has suffered sun, wind or seaside damage to the paint as well, so when I paint the replaced bodyparts, the top half of the truck (at least) needs paint as well. This truck has minor dents on a few panels as well, so before I shoot anything, I'll work those dents out first. ToyoTruck is our true daily-driver. I hope, once GoRo is gone, and Oliver is legal, perhaps we will drive Oliver and Hapy around, leaving the truck home more.

When I can get away from house construction projects, I will be getting after this stuff, starting with Oliver. He is such a fun ride, and it would be a shame to lose another Summer to something like DEQ. I know I have not been posting much, basically since we bought this house. That day, car work mostly came to a halt, and house construction is much slower and frankly less interesting to post on. I will make me next post a catch-up on what's happened here since my April post.

Thanks, as always, for following along-

ToyoTruck Saga Continues

Earlier, I posted about a new arrival to the fleet (a 2006 Toyota Tacoma XRunner) and the smash into a post that followed. Today's post is the next step in that saga. 

 

Where Were We

front assembled

We got a $5k repair estimate, but insurance wouldn't pay (because the agent screwed up). So, I ordered the parts, and set about doing the work myself. With supply issues, it took an incredible amount of time for everything to arrive and the largest part, the hood, arrived with a big dent in it. I successfully replaced the fender, the 6-piece bumper and the fender liner. The radio antenna was so corroded, it could not be removed, so I had to replace it as well. The hood scoop was also degraded, so I ordered another one of those. I ended the post while waiting for supply chains to support a new hood, as well as deliver the replacement passenger-side flare and the hood scoop.

Hood Gets Hammered

I decided I could no longer wait for parts while the new truck occupied my best work bay (read: prevented me from working on Hapy). Besides, there was no way to know how long it would be before a new dent-free hood would be available again. So, I decided that I would do my best to get the old hood straight enough to fit without putting pressure on the new fender nor passenger front headlight. I started with my angle grinder, removing the remaining paint from the dented area. The leading edge of the hood had been crumpled under, against a lateral bulge that rests just rearward of that edge, along the underside of the hood (see the picture on the right). Since the lip was forced against that bulge, I was unable to get a tool between the two.

the damage from the underside

I started with the stud welder and a slide hammer kit I got from Harbor Freight when I started working on Zed (1978 280ZX). With the 2mm tip and studs, I was able to slowly move the leading edge of the hood away from the lateral bulge. After about 30 minutes, and a dozen studs, the edge had pulled back far enough for me to fit a dull chisel against the leading edge. By moving the chisel up and down the lip, giving it a few smacks every few millimeters, I was able to further shift the edge away.

Once the edge had been moved about a finger-width from the bulge, I started shifting from the hammer/chisel on the lip to the stud welder / slide hammer on the top of the hood and back. My hope was that I could get some of the original hood contour back while I got the edge pulled. I spent about 90 minutes in total before I felt that it was close enough to set on the truck to see how close I was getting.

Old Hood Finish Up

time to try fitting

I was satisfied enough with the hammer work to move the windshield washer hoses and the seal. I figured that if I was as close as I'd hoped, I wouldn't want to remove the hood simply to put these bits on it. Like so many things, the first time always takes longer than any subsequent attempt. I had the bits moved in minutes. The hood set quickly as well. Some cars have a great deal of adjust-ability when the hood is mounted, but this truck does not. Yes, there is some, but not more than an inch left-to-right at the front edge. I did not need much to get the hood evenly spaced between the fenders, though.

Similar to the hood removal, I set the front of the hood on my old plastic tool box so I could get to the hinge bolts. Before I slammed the hood down, I checked the height between the headlight and the hood edge on both the driver and passenger sides to make sure I wouldn't break the light housing. I found that I had over compensated with my hammering, but only by 1 or 2mm. I started a recurring cycle of identifying where the gap was, opening the hood, adjusting, and re-closing the hood. After 4 or 5 of these cycles, I was satisfied that it was good enough for now.

finished enough

The stud-welder took it's toll on the hood, however. Some of the studs were welded on so well, that my efforts with the slide hammer resulted in a small hole in the hood. I own that, though: I believe that I held the trigger a touch too long on those studs, setting too strong of a weld. Some of the other studs would not come off no matter how hard I hammered them. I ultimately had to cut them off, but there were bits left behind. So, I pulled out the angle grinder again, and ground the dent-damaged areas of the hood smooth to the touch. I shot the polished metal with some rattle-can automotive primer and then some basic black Rustoleum. The final-for-now product is pictured on the right. That passenger flare will be installed when it arrives. I haven't decided about the scoop insert.

Weeks Later, It's Done

At this point, I felt done enough with this project. Yes, some part of what I put together will need to come back apart for painting and when the passenger side wheel flare arrives, I will attach it. One day, I hope to have a better hood, and when that day comes I need to install the scoop insert as well. Since I would like to have the whole truck painted, I may take it to Beaverton Auto Body and have them do it. We already have a somewhat dated estimate, but at least we know what ballpark they are in. Of course, with inflation these days plus all the extra parts expenses I incurred, a re-shoot could be prohibitively expensive. Expensive enough to bring that work right back to my driveway to be shot in my home-made "booth" later. Oddly enough, the extra parts (scoop insert, p-side flare, and antenna) plus a second and future $500 hood still will still be less in parts than the Beaverton Auto Parts bid. And that number includes a hood I can't use, and I have not tried to sell off any parts I got and did not actually need.

That's it for today. I will return to the hood when I get one, and otherwise I will be focusing on Hapy again. Thanks, as always, for following along-

Enter ToyoTruck

Super long post today, and I still didn't get the project all the way done in one post. I did get most of the way, though, and I'll wrap it up next time. For today, I'll hit some background first, and then get into the adventure with this new-to-us truck. Since this started on Christmas 2021 and today is the first of March 2022, clearly this has been quite a saga. At the rate this is progressing, it will be competed mid-Summer.

Background - the setup

example image

When C returned for winter break from University, he left his car ('09 Subie) on campus. He needed a car while he was home so he could get to work, but we have a significantly reduced the operable fleet (sold Flash, sold K'Lack). So, we borrowed-as-a-prelude-to-buy Boo's sister Rose's Toyota Tacoma X-Runner. I am referring it ToyoTruck for now, though the interweb folks often call these "taco's". I suspect it will get a better name when it presents iteself. Rose has an older Ford truck that is getting a new engine swapped in, so this Toyota was kind of extra anyway. Clearly, having extra cars around is a family thing for us, and with the rehab we plan on doing on this house, having a pickup readily available for supply runs will be valuable. Anyway, C arrived home a few days before Christmas, just in time for some radical winter weather. We got snow, and ice, and more snow, some sleet, and melting followed by freezing. It was a full-blown winter stew. We let C use Boo's '09 Audi A4 (all wheel drive, newer M&S tires, etc) while Boo drove ToyoTruck. ToyoTruck is rear-wheel drive with mostly-worn-down summer highway tires. That would have been fine if it weren't for the winter weather. With Boo's new schedule, she has to report by 7:AM, which means leaving well before dawn, and right about at the overnight low temperature. This lead to a Christmas morning (yes, she worked Christmas morning) sliding-on-the-ice scenario which ended with the truck smacking a pole. The passenger fender, the bumper cover, passenger headlight, passenger fog light, the leading corner of the hood and some assorted little bits all were affected by the very low speed impact. The damage seemed minimal enough that Boo continued on to work. It wasn't until the next day that we got to access the damage in the daylight.

How Does that Insurance Commercial Go Again?

after post-smack

In the daylight, it looked pretty twisted, but it is mostly surface damage. I took a bunch of pictures and we tried to get a claim going with our insurance company. Turns out that insurance goes with the car, not the driver, so we needed to use Rose's insurance. We learned this while we were getting bids (~$5k) on the work. This is where insurance got interesting: even though Rose told Allstate she wanted "full coverage" the agent pulled a massive boner and failed to include collision (pays for damage to your car). How that meets the definition of "full coverage", I don't know, but I swear this feels like one of their ads... where they say the competitor will leave you hanging with a tagline like "if you don't have Allstate...". It appears that the Allstate ad is actually self-describing. Maybe their ad should be more like "if you let our agents do it, you're gonna get screwed". So, to sum this up: we borrowed a truck, slid into a pole causing ~$5k worth of damage and there's no insurance to fix it. Happy Christmas.

Paulie: Bodyman

Fast Times Camaro

To resolve, I tried my best Spicoli imitation: "Relax, all right? My old man is a television repairman, he's got this ultimate set of tools. I can fix it." Of course, the next scene in that movie (Fast Times at Ridgemont High) has that car, unrepaired, but tagged with Ridgemont sucks / Lincoln rules spray-paint. Instead of that, I'm actually going to repair it. I took the itemized bid and ordered all of the parts the body shop said needed to be replaced from CarParts.com. This cost about $1300US delivered. The bid had the parts for around $2k, so we are already ahead in the game. I will simply remove and install the parts I received, and hope I discover nothing else is wrong. The labor for the body panel removal/replacement was $900US. So, if I can get the truck back into one piece, I will have saved over half the bid. At $900US, using my usual price for my labor ($50/hr for simple math), I break even at 18 hours. On its surface, I think I can get way under that. I had a great experience with CarParts.com, by the way. The bumper cover was wrapped in thick plastic wrap inside a huge box and the fender was made-in-Taiwan steel double-wrapped in custom cardboard protecting it plus packing material between the wrapped fender and the box sides. The packaging of the headlights was equally protective. Some of the shipping, however, was spotty. We can credit GLS for losing and then claiming delivery of almost half the order. Ultimately, they got the parts to me, 2 weeks after they said they were delivered. That final delivery was curious in that the box appeared without a text nor email update, though I had been set up for both. Sneakily done, GLS.

 

Finally, with all the parts I had ordered in my garage, I was ready to get started. I had finally gotten the 2016 Sprinter seats installed into Hapy (See Hapy Seating Part 2), so I could shuffle vehicles around. Hapy went back into the driveway and ToyoTruck moved under the canopy so I can work out of the rain.

Body Panel Removals

2 replacement bits in

I started by removing the front grill, fog lights and bumper cover. Then, I pulled the headlights and removed the fender, leaving the hood for last. The grill is held to the top of the radiator support with 3 Phillips screws across the top. Down below, the electrical plugs for the fog lights are simple tab-lock plugs. Since I am replacing the fog-lights with the bumper, I left the old lights in the old bumper. For reference, just press the tabs and they wiggle out. With the plugs out, the fog lights can push through the bumper (after pressing inwards on the plastic retaining tabs). The bumper cover is held on with plastic push-on tabs across the top as well as a few from underneath. These pop free with a slotted screwdriver. Since they are 15+ years old, they will often fail on removal. There are also a few 10mm screws as well, all from below. The ends of the bumper cover tie into the inner wheel well plastic, but eventually, once the last fastener is free, the bumper just wiggles free.

I next removed the under-headlight trim bits. There is a small plastic push-on thing, like the ones that held the bumper cover, on the inside that attaches the trim bit to the headlight, but the rest of it just clicks into place... or out of place. The headlights are held in place with long Phillips-head bolts from the top, and 2 more on the sides (one connects to the lower radiator support, the other through the side of the fender). The lights unplug, but if they are stubborn, the bulbs which are not the main beam twist out with a 90* twist. Then, the plug can be wrestled free. The last big thing to remove is the fender itself. There are obvious bolts from above, but there is one hidden in the door jam near the top and one from the outside just rear of the wheel well. Of course, before final removal, the inner wheel well needs to be removed, and the antenna needs to be dealt with.

 

super-glued tabs on the flare

 

The Inevitable Annoying Bits

The antenna and the inner wheel well skin are the worst part of this parts exchange. The antenna had become heavily oxidized and corroded, completely freezing the top nut. I ultimately broke-off the lower antenna mast so I could continue and ordered a top-to-bottom replacement, adding another $140US to the parts costs. Even on my garage floor, I was unable to separate the antenna bit from the bent fender.

The plastic inner wheel well is held in place by ribbed plastic clips along the inner edge and in a couple spots in the middle. Along the outer edge of the fender, the fender, the inner wheel well and the outer faring (flare) are held together with Phillips/10mm screws. When the truck hit the pole, the 3 top mount points along the outer faring / flare all broke. I did not realize that until I was removing things. Rather than order a replacement ($130US plus delivery), I collected the mounting ears and super-glued them back onto the flare as shown in the picture. Once the superglue had set up, the tabs did not wiggle. Since they broke off so cleanly, I could see their original pitch. So, I simply matched that and held the tabs for a 15 count as the glue set.

With the big parts out of the way, we can see where the little bits that Beaverton Auto Body suggested replacing. There is a small plastic bit that looks like a tiny fist with the hole in it that is Phillips-screwed to the fender. This holds the edge of the bumper in the right spot relative to the fender. There are 2 long thin brackets which support the top and bottom of the bumper cover (and lower leading edge of the fender) which were definitely tweaked. The small triangular bit that attaches to the passenger-side front (front is front) of the radiator support, extends forward to the other end of the long thin bracket, had a subtle twist to it. All of these attach with 10mm bolts, and you can see them installed in the picture above captioned "2 replacement bits in". They are the ones with big white labels.

Start Re-Assembly

windshield washer lines pre-removal

I started with the small bits: the triangular bracket first, and then the support bracket on the passenger side. I decided that the driver side bracket was untouched by the accident, so replacement was unnecessary. I swapped out the driver-side headlight next, re-using the original under-headlight trim bit since it was undamaged. Then, I tackled the fender. It is surprising how much faster install can be when you know where the fasteners go. I started with the 2 most difficult: the one on the bottom, heading straight in from the outside, and the one from inside the door. The bottom bolt is really only difficult because of all the extra lower body trim that appears on the XRunner needs to be loosened and held out of the way. I fear that I will need to completely remove all of the panels on that side because of all the dirt and sand I found in there when I took it apart. That dirt/sand may prevent a clean, tight install. Anyway, with the hard bolts in, I ran the bolts in along the top edge and then the front pair into the new bracket. I am not thrilled with the gap along the hood, but I will concern myself with that once the new hood goes on. It is possible that the hood got tweaked beyond just the small dent in the front corner.

After the fender, I installed the passenger-side headlight and the replacement under-trim. Other than cannibalize plastic fasteners from the bent and broken old body panels, this was as far as I could get at this point. I ordered a set of plastic snap-fasteners, but they had not arrived yet. Also, I had not planned for the antenna, so I could not completely button-up the fender and wheel well anyway. Yes, I could have stopped the post here...

The Hood

only disconnect needed

I was able to source everything, except the hood, from CarParts.com. For the hood, I turned to eBay, and got burned with a hood that arrived with a dent. My cursory inspection upon delivery did not detect that the passenger side had a couple of bashes in it under the cardboard wrap. I had checked the other 3 sides, so lesson learned here: completely unwrap the entire thing before you sign. I didn't know the pair of dents were there until I went to install it after installing the inner wheel skin down below, sadly. So, if I want a clean hood, I will order, pay, wait for and move-bits onto a second hood. FFS. Of course, with the supply chain issues around the world, there is a very small set of these hoods in the western US. In fact, according to the local Toyota dealer, there aren't any.

 

Obviously, the hood is held to the truck by 2 large hinges. Additionally, the windshield washer nozzles are in the hood. There are a few other things to transfer to the new hood, so I simply disconnected the washer hose and removed the bolts to free the hood. Then, I set the old hood next to the new hood in my garage. Piece by piece, with the puppy (Tuukka) watching, I moved the washer nozzles, bits of hose, the sealing rubber bits and the front rubber feet. Those feet are pretty interesting: they are solid rubber and thread in. You set the height of the closed hood by turning them clock or anti-clock wise. Very clever design.

 

There is a sealing strip that runs along the rear edge of the hood, held on by little plastic fasteners. I was able to free them without damaging them by using a door panel removal tool. I expected the washer nozzles and hose to the the hard part, with the scoop insert to be a breeze. It was the opposite, with the hose retainer plastic bits and the washer nozzles popping off with only a little difficulty, but remaining intact for reuse. These bits are held in place by little plastic barbs that need to be pinched in for removal. I used a slotted screwdriver, working one side and then the other until each one was free.

Hood Scoop Insert

The hood scoop insert, however, has seen better days. The mounting studs all backed out of the scoop, rather than allow the nuts to back off the stud. The 2 front studs would not separate from the old hood at all, and last, during install into the new hood, it cracked. This plastic is over 15 years old, and based on the damaged paint on the top of the vehicle and the sand I found in the wheel liner, I think we can conclude that this truck lived at the beach for a while, getting salt water on it while driving on the wet sand. I suspect it was parked outside mostly, as well, further accelerating the aging of the exterior. I will accordingly reset expectations for any other exterior bits I touch going forward.

I ordered a replacement hood scoop insert (another $140US for parts), and started considering doing a complete respray of this thing once the damage has been resolved. Of course, with the way I have to keep buying parts, that respray may need to wait a while. Meanwhile, I was in a holding pattern waiting for parts... and I was looking for a hood, again. Yes, I could have stopped the post here as well.

The Bumper

dry-fitting the bumper

The bumper cover / assembly is actually 6 distinct plastic bits: the main bumper cover, of course, a decorative center piece below the grill, 2 end pieces and 2 lower valences (split in the middle). Of these parts, we damaged 3: the main cover, the passenger-side valence and passenger-side end. All of these parts are held together with these blue wedge-like plastic clips. I was able to salvage all but one (which disappeared), which tells us just how slow moving the crash was. While I waited for parts, I re-assembled the bumper bits, excluding the decorative center. I had thought that I could paint the bumper as an assembly, but, I realized that I would need to take it all apart to install the decorative bit anyway, so I will be taking this all apart to shoot it. Of course, I put all this together mentally after I had put the bumper together physically. LOLs.

Still, by having the bumper bits together, I could dry-fit the front end together. Also, this reduced a big pile of parts in my small garage, and it helped me understand what bits I could sell-off, and which I still needed. For example, I discovered that there are little rubber strips between the main bumper cover and both the lower valences and the end bits. In the upper dry-fit picture, you can see the old valences on the ground below. A keen eye could see the rubber seals on top. I will be re-claiming those rubber bits before I dispose of the broken plastic parts. As you can also see. I have not removed the protective film from the lights yet; no need to tempt fate.

More Parts Arrive...

dry-fitting with the grille

After another week of waiting, things I ordered during the tear-down / re-assembly started to appear on my doorstep. So, I got back to it, starting with the antenna.

 

The antenna arrives with a stretch of cable that's about 1/2 a meter long with a pair of mounting clips already attached. This cable passes through the side wall and the fire wall up behind the glove box, and then runs up into the A pillar where it plugs into another cable. This seems like a strange design, but it's how it is. To access everything, the glove box needs to come out and the passenger grab handle needs to come out. There are a couple of plastic retaining clips that need to be popped (the OEM replacement antenna arrives with new clips) and then it is ready for removal. I attached a string to the end of the antenna cable and pulled it out through the side wall. I moved the string from the old cable to the new and pulled the string, bringing the cable along the original path.

 

The plastic tabs were in the right spots, and they popped in. The one in the rear of the picture below was a little difficult, but only because it is in a hard-to-get-to spot. I found by getting the front edge of the clip (front is front) first, allowed me to put pressure on the rear edge with a slotted screwdriver, snapping it home. Once the cable was in, the panels were installed in the order I removed them. The leading edge of the A-pillar trim inserts into a slot on the edge of the dash (seen in picture below) while the upper end has a tab that also fits into a slot: idiot-proof. The grab handle only fits into the A-pillar trim one way, and, because of the tabs, the mounting bolts align without effort. Inside the fender, the cable has a rubber grommet to seal the pass-thru hole. The top of the lower mast is then passed up into the hole in the fender and the lower end is bolted to a mounting tab with a 10mm bolt. After all the wrestling with German over-engineering, I really like this Japanese design. I feel like the Tacoma was built with owner maintenance in mind. I finished up the antenna on top of the fender with the outer rubber bit and nut and then threaded on the upper mast.

The Inner Wheel Well

installing antenna

All I had left was the inner wheel well, but I didn't explain the assembly of the rest of the bumper. As I mentioned earlier, I assembled the bumper, but I needed the bits to mount it. This was a straight-forward matter of using the plastic snap-clips where they belonged, and using the 10mm screws where they belonged. Since I failed to take quality pictures during tear-down, this was not as smooth as it could have been. Still, it all went together, leaving the passenger side wheel well. I purchased a replacement inner skin because I saw that the original had been damaged in the accident. The new liner was an exact match, and fitting it was not as terrible as installing on the old Jettas, but it was pretty close. These plastic liner things are the absolute worst. I did the outer edge last, simply because this edge also held the flare in place and I felt trying to juggle 3 things which were not in any way attached was at least one too many. The inner edge was straightforward: set the plastic skin where it is supposed to be and slam the plastic bit through the holes. The challenge for me was getting the square holes in the skin to consistently align with the square holes in the under-body.

With the skin now held in place by a handful of plastic bits, the outer edge was easier. I started at rear bottom and worked my way up. Again, having pictures would have been helpful so I could confidently set the skin / fender / flare stack correctly. Absent that, I just considered where water would go. So, I put the inner skin "outside" the fender along the rear edge for the first 3 fasteners (block water kick-up from the tires from getting inside fender) and at a cut-out transitioned it "inside" (so water drips from above don't run under the inner skin). At this point, I attempted to mount the fender flare. The super glue repair I described above failed almost immediately, so I shifted to the hood.... at which point I discovered the dents and my progress halted again.

 

I am going to halt this post here, and pick it up in another one. This has gotten very long, matching the saga, and the truck is still not in one piece. And, again, I'm waiting for parts.

Thanks for following along and more next time-