Vanagon Seat Install

Today starts my vacation, yet I'm getting one last post in before I go.  I wanted to give an update on both the Vanagon loveseat as well as the transaxle.  I've kinda wasted the afternoon, so I'll probably keep this short.

Love Seat

what goes with green/blue plaid,
grey, white, and blue?
Why, TAN of course!

Ok, maybe calling it a loveseat is a bit much.  Its a tan 2-seater bench seat from a brown Vanagon.  Once installed, I'll have a '79 Westy folding bed seat, front seats from a '74 and a bench seat from a Vanagon.  It will be a true franken-bus.  Sue me.  I'll be able to carry 5 people (plus me driving), and camp once we get there.  Try that with a stock VW bus.  Anyway, on to the progress report.  In order to fit the bench, I had to pull the stove/sink unit.  That cabinet now adorns my living room floor, but it makes ample room for the loveseat.  Once I made space, I aligned the rails with the seat by aligning the seat mount holes with the mounts within the rails.  I then duct-taped them together and put the whole operation into the bus.  With some wriggling, I set the spot front-to-back by lowering the folding bed and putting the bench up against it.  My thinking was that I may want or need to carry something long while also carrying some folks.  I was able to carry my entertainment center on that folded down section before.  Now I'll be able to bring 3 friends to help me move it.  Last time, I could only bring 1 friend... and he wasn't exactly thrilled at that prospect.

rear left rail location
westy fridge cabinet in
upper right corner

I marked up the wood floor with pencil so I knew where to put the rails and then pulled the seat out again.  Remove the rails from the seat and set the rails back in place.  I then set to measuring all over the place so I was sure that any hole I drilled in the floor wouldn't hit the radiator, the supports, the main front-to-back beams, the brake lines, etc.  I managed to miss everything important on my first try.  Hazah!  I drilled out 6 holes to 3/8" and wrenched bolts through.  From the underside, I lock-washered and nutted the bolts down. Last, I re-inserted the seat the "normal" way by sliding the seat onto the mounted rails.  Done.  All told, it took a few hours, but I move slow.

Transaxle
Well, we're behind schedule a little bit on the transaxle.  The CM code transaxle used the early gear sets and Daryl only had the later sets on hand.  With one of his guys out sick (or following a band around the country), he was behind schedule anyway, so this just put us a few more days out.  Unfortunately, those few days are probably the diffeence between having the new transaxle in time for the trip to Southern Oregon and not.  So, the bus may not go.  We'll see.  If the transaxle arrives tomorrow, there's still time.  I need a few days to do the work (see: I move slow) and we leave in the middle of next week.  Sigh.  So close and yet not quite close enough.

right edge of seat & slider

That's it for today.  The next time we go for a spin, we can carry the whole family.  We'll just be travelling at a max speed of 52MPH for now.  More next time and thanks for following along.

One Slammy of a Sammie

A few years back, I worked at one of those Internet startup companies.  I had a lofty title and a pile of worthless stock options.  My situation was pretty common in the computer business at the time.  As Wall Street started to figure out that most of these companies were glorified Ponzi-schemes, the one I worked for strove to stay open by moving out of our fancy downtown digs in the emerging "Pearl District" to a zoning experiment in Beaverton called "the Round".  Originally intended for condos, the 4 story building was virtually vacant a full year after completing the bones.  No one wanted to live there.  So, they dubbed it "office space", and we moved in.  Of course, it was still the days of perception, so lots of customization was done to the space including open stairways and the like.  Well, it was still an open sewer compared to our last location, with a junkyard out one window and an abandoned building out another.  When contrasted to the bustle of downtown hip Portland, I was less than impressed.  Driven to find something remarkable, I would foray out at lunch.  One of my greatest finds is the subject of today's post.

Beaverton Sub Station

Front Entrance of
Beaverton Sub Station

Situated against the train line that runs through the center of downtown old Beaverton, is perhaps the best sub shop in the greater Portland area.  Sure, there's Kornblats if you want specialty sandwiches, but for a pure sub-shop experience, there is none better than Beaverton Sub Shop.  Chuck, the owner and main behind-the-counter-operator, hails from Chicago.  From the Cubs hat to the quality of the meat, he's all-Chicago.  He has a thing for trains, and his decor reflects that interest and the rail-side location with pictures and artifacts from railroading.  Even the menu has a train-car metaphor.  6" sandwiches average around $5 and foot longs are around $10.  The rolls are huge.  The dressings remind me of the subs I used to get at the deli as a kid growing up in New York.  Very Yummy.  From the day I found them as an employee at an Internet startup thru today, I try to make the Beaverton Sub Station a regular stop.


Bus middle-seat Update
Yesterday, I drove over to Always VW and picked up some mounting rails for the middle-row seat I got in Eugene a few weeks ago.  Not knowing how they originally installed, I was glad to be there watching it get removed from the donor vehicle.  4 bolts hold the seat to the rails, 4 bolts hold the rails to the body.  Simple simple.  I'm assuming that the Vanagon has a set of nuts welded into the body, and I won't have that in the bus, so I'll need a buddy (or careful vice-grip use) to get the rails bolted in safely.  If I can suffer today's heat, I'll be removing the sink/stove unit and start looking at seat placement.  If things go well, maybe I'll have the seats in by the end of tomorrow.


Transaxling
Daryl at AA Transaxle in Seattle is just completing the transaxle rebuild.  I've had a few questions about what I'm doing for gearing, etc, so I'll lay that out here.  First, we started with a '75-only (CM code) transaxle.  It has a stock 4.86 final drive (ring & pinion) like the Vanagons do.  We're leaving 1st and 2nd gear alone. For 3rd, we are using an aftermarket, hardened 1.14 and we're pairing that with a .73 4th from the same company/family.  This combination should provide the right power (HP) to torque curve intersections.  I intend to run my stock 14" rims and rubber through the Summer.  If money appears, I'll slap some larger (in diameter) tires on the 15" rims I have in storage.  I may just wait for Winter and slap 15" snows on instead.  We'll see.  Regardless, the transaxle should appear this week, leaving me next weekend to get it installed if I'm going to run it down to Ashland for our family reunion.  It feels tight, but do-able.  I just need a place to do it, and to dig through my storage facility to get some specialized tools... like the ATV-jack adapter I built.


That's it for today.  Time to drink some coffee and get to pulling that sink/stove unit. I'll update with some pictures. Posting from an iPad doesn't seem to support uploading photos. Grr...

Enter Summer, exit posting

Yes, I'm alive. Like so many folks in the Pacific NorthWest, once Summer weather arrived, I stopped using the computer when I wasn't working, and got to playing. I do have some personal and bus updates, though, so I'll bang that out before pouring myself a welcome-to-weekend mojito.

Housing

just making a point...

As much as the news folks talk about how "bad" the real estate market is value-wise for sellers, it is very hard to find a good deal as a buyer. When I moved out of my townhouse apartment in mid-March, I started looking for a house, agent and mortgage lender and all. Within a month, I had an offer on a house, but between the banks holding the mortgages getting in the way, that house is still unsold. My offer expired, and I restarted it, but in the few days between, someone else got into the bank's radar system and they're in first position now. Apparently banks think serially, and can only address one offer at a time.  Fun. It's a good thing other businesses don't operate that way.  So, I offered on another house. And another. And another. All told, I've laid offers on 5 or 6 houses now. Most of them still haven't been sold and my offers just expired along the way. I think I just may get this last one, though. I put an offer on it in late May. Yes, that's right, late May. I have been extending and re-extending on this one.  I've been told that I might expect an acceptance of my offer by the end of next week, or early August.  I'll post a picture when that happens, so until then, here's a generic "Bank Owned" sign.  Yeah, like that's gonna get you to place an offer on it.  Prepare for weeks of no contact from the selling bank, and make your offer expiration date something you can live with, yet recognizing that the bank will not get it together within 60 days of you popping an offer on it.

So, how much of the real estate market / housing problem is being created banks who can't get it together? Had this been a normal deal, I would have gotten an accept, decline or counter-offer within a few days. By the bank adding in the 10 extra weeks, it looks like the houses are staying on the market an extra 70 days. That makes the market look falsely bad, like you can't sell a house because it's still dropping in value. The truth is, the market is coming back, based on what I'm seeing in terms of buyer traffic, but with the banks extending the process by literally months, it paints a different picture. One the news folks continue to hawk on the nightly's.

Microbus slightly too micro

note the overhang

I've been trying to figure out a way to fit 6 passengers into the bus, so we can take the whole family in one car. Boo and I toyed with the idea of buying something just for this reason, but cars are just too dang expensive. I said, "with a small fraction that money, we could get the bus to do it."  So, while Boo drove my TDI Jetta to Montana with her 2 boys, I drove her car to Eugene to get a free (yes, $0) middle-row Vanagon bench seat. When I got it home, I did what anyone would do: try to fit it. Fail. From the edge of the Westfalia sink/stove unit to the edge of the sliding door is 39". The width of the benchseat with the cushions scrunched is closer to 42" (see overhang picture on the right). Add on 3-4 inches for the arms, and it totally won't fit.... with the sink/stove unit in place. I intend to pull the sink/stove to fit the bench seat, and build a new cabinet that's just 16" deep (or 7" less deep than the Westy one). Then, the seat will fit, and when removed at a campsite (or ski resort parking lot), the cabinet can be usable. I will probably forgo the stove, and only do a splash sink with a wide counter where we could use a Coleman portable stove instead.

Microbus to get macro-speed

upper frame width pushes
lower frame away from cabinet

Last, I finally have arranged for a new transaxle from AA Tansaxle in Seattle. Daryl and I have figured out the details, and he will be starting the construction on Monday. If all goes well, it will be crated for shipping by the following Friday. Then, I'll just need to find a spot to drop the existing engine/transaxle, remove the old tranny, attached the new one and re-install. (note to self: get a new throw-out bearing just in case) Dropping the engine/transaxle isn't hard, but mating a new transaxle while leaving the engine under the bus may be. Remember how far over to the side I needed to tilt the undressed, un-oiled, no coolant engine to get it under the rear valence? I wouldn't want to try that with the fluids in, nor with all the other parts attached. Better to just separate and mate under the belly of the bus. Lots of muscling ahead, I'm sure. I'll post pictures, etc.

That's it for now. With Summer in full swing, I doubt I'll be online too much. I'll try to get better about it. I have a big road trip to Ashland planned, if all goes well, maybe the bus will go too....