Moving Into Shop

It has been a busy couple of weeks spent mostly moving stuff from the tool shed into a big heap at the front of the shop. I did get to wrench on Boo's car, Astra, though. Today's post is mostly about Astra, but the pictures show the move of stuff as I didn't get my phone out to take pictures of Astra's alternator replacement.

 

Weather the Weather

shop heap

One of the best parts about living in the Pacific Northwest are these incredible spring days. When I first moved here decades ago, we would enjoy what I called "the weather donut hole" in April. It was a short, maybe 2 week period, when the rains stopped and we got these just gorgeous sunny days. Then, we would descend into another 2-1/2 months of rain until July 5th. Through the wonder of climate change, our spring weather donut hole has grown. Maybe 10 years ago, it would last most of April. As recently as 2 years ago, the donut hole never closed, and we did not get much more than 2 or 3 days of rain a few times before the summer dry season hit. This year is looking more like 2 years ago did, with mostly clear and dry days with a few passing rains to knock the pollen out of the air. While I worry about summer fire season, we make the most of these below 25*C (80*F) sunny days with daylight lasting until 9PM.

 

So, with that backdrop, I had a meaningful car repair to get after.

 

Astra's Backstory

Boo replacing Dude's starter

Well before I met her, Boo used to drive an Opel Kadett. Always generous, she let some friend use it and never saw it again. Years later, when I met her, she was driving a gold Saturn sedan (named "Dude"). She loved that car, doing everything she could to keep it on the road. Again, a friend of my dad needed a car for a while. This friend was running errands for the less-physically able in my parent's building, so she loaned him Dude. It was stolen, and when it was recovered by the police, the ignition and steering column were destroyed. With considerable sadness, she let the car go to police impound auction. She had owned Dude for 18 years.

 

Fast forward a few years and I'm driving along and find myself behind a 4 door hatchback with a Saturn symbol on it. At the next red light, I snapped a picture of it and sent it to her. We were in the market for a new car after the GoRo disaster and had been talking about a Mazda3 or maybe a small SUV. The Saturn appeared to be an intersection of her appreciation of the looks, lines, mileage and size of the Mazda3 with her love for Saturn. I started investigating and learned that the Astra was built with Stellantis/Vauxhall, owner of Opel and original manufacturer of the Kadett. In fact, the Kadett evolved into the Astra. So, the Astra was really an intersection of her beloved Saturn, her equally beloved Opel Kadett and her appreciation of the Mazda3. Of course, now I had to find one. The Saturn Astra was only available in the states for 2 years (2008 and 2009), and not many were sold. We lucked into one outside Salem for literally $2kUS and after applying another $1k of repairs and tires, it has been a fantastic family member.

 

tool shed "empty"

She is not without her issues, though. Sometimes she does not want to downshift and just groans in a too-high gear. This is reset with a restart, but that's not easy in traffic. Over the last 18 months, though, the battery had been not charging enough on shorter drives to start again. She priced having someone replace the alternator, after having it checked, and the $800 price tag lead us instead to get a jump pack to jump start her when she didn't want to start on her own. This lasted over a year until a couple of weeks ago I took on the task of replacing the alternator. By the time I got to step 3 or 4 in reading the online "how to", I understood why shops were giving her a "go away" price.

 

Alternating Astra

In January, Boo and I planned for a trip to the east coast the week before Memorial Day. We were going to visit my sister and her family and then see our son K2 (currently serving in the US Navy at Quantico). Then the trump administration decided to pick a war with Iran, airline prices spiked and our plan was scrapped. Thanks trump. Nature hates a vacuum, so what would have been a trip to the east coast became an opportunity for me to spend up to a week fixing her car with no drive-to-work pressure.

 

shelving starts

The challenge with removing and re-installing an alternator on the Astra is that the alternator only fits out the left front (passenger-side) tire well. Even then, it doesn't fit easily. So, the process is you get the car up on a jack, remove the wheel and the inner wheel well just so you can approach the serpentine belt and alternator. Disconnect the battery. I put the battery onto a charger while I did the rest of the job. I found removing tension on the belt tensioner especially difficult because of the required body positioning to access it and the steel supports blocking direct access. I you reuse the belt, mark the belt direction. I used a spanner-on-a-spanner (yes, it's cringe-y) for sufficient leverage. With the belt off, you can get at the 2 alternator bolts. With the alternator loose, reach around the rear and unplug the 2-pin socket. It has a latch holding it on. I palmed a small bladed screwdriver around everything and got the latch to release without breaking it. Then, remove the nut holding the main cable to the rear of the alternator. At this point, some folks have posted that they have been able to worm the alternator through the wheelwell. They must have a different engine than we do (2.0L). I needed to remove the air box and then the engine mount bolts underneath it, so the engine on the left side was no longer attached. I did set up the TravisJack under the engine so it didn't lower at all. Then, the engine itself needs to move as far forward as you can manage it. I just grabbed onto it from over the radiator and pulled. The alternator drops down and out behind the engine and out the rearward end of the wheelwell opening. I found that if the alternator is in the same orientation as it was when installed, it does come right out. Any other orientation and it will get stuck. Yes, this happened to me many times until I figured it out.

 

end of day 1

With the old alternator out, the install is mostly the reverse. Alternator enters the wheelwell oriented as it will be installed. I plugged in the socket and nutted on the thick cable before then attaching the alternator to the engine. Next, I put the serpentine belt back on. It has maybe 20k miles on it since it was replaced by the yard we bought the car from. With the belt tension restored, I moved the engine back into place and re-connected the mount. Then, I put the airbox back in and returned under the car to put the inner wheel well back on. I finished up with putting the wheel back on and the battery back in.

 

I had read online that this was a 8+ hour job, so I had set aside 2 days, hoping that I'd be done by Sunday in time to see our friend Maldarine play a show. It took me 6 hours, start to finish, backing her out of the shop and the lane way back into the front well before dark on Saturday. 

 

Moving In

With all the extra time I now had, I decided that I would get as much of our summer project done as I possibly could. I figured that it wasn't raining and every nice summer day I could save by doing things now, would make for a better summer. This year's project is getting everything car-related into the shop and everything home-repair related into the tiny shop (tool shed). Then, the only stuff in the garage is camping and ski gear, leaving plenty of room for Boo to park Astra when the fall rains return.

 

partway day 2

I had started with the garage, moving the red rolling tool cabinet before I even had the doors installed. This renewed effort was about getting anything else car or tool-related from the garage into the shop. This included my jacks and stands, the hypersonic-cleaner and lots of random parts. All that remains is my big black rolling tool cabinet. I hope to move that this week.

 

Next, was the tool shed. I regret not taking a genuine before picture. The shed was so full, the back half was out of reach, blocked by stuff. So, those large items blocking the floor were first, rooting through them a little bit looking for junk before moving the keeper-bits to the front of the shop floor. I noted that there was evidence of rodents, so I spent the next few days wearing a dust mask, shop-vacuuming a lot, and generally moving at a slower-than-hoped pace. I would vacate a shelving unit, dismantle and wash it, move it, and finally re-assemble it inside the rear of the shop. Most of the stuff that were on the shelves ended up in a heap at the front of the shop, or a heap for the dump. The exceptions to this were solvents and cleaners, which went onto freshly cleaned shelving, and everything painting related, which went into an old kitchen upper cabinet the kids used to use for skate and snow gear repairs and parts.

 

Those with a keen eye will see (in the shed heap picture at the top) that I put Zed on furniture dollies so I could move him around a little bit. These dollies are the $30, 1000# max variety found at Harbor Freight. The genuine car dollies I've seen cost up to 10x that much. Are they 10x better? Unlikely, except they work on heavier cars. I was able to move Zed by myself, one end at a time, so I could fit a shelving unit against the wall beside him. I used another pair of those same dollies under the paint cabinet.

 

paint cabinet on wheels

Boo and I agreed that the Tetris I did to get Zed's entire interior onto the high shelf in the tool shed could not be easily repeated (see the upper deck in the tool shed "empty" picture above), so that stuff stayed. Otherwise, the tool shed is clear of car stuff, the shed is cleared of all evidence of rodents and the shop vac has been emptied and washed. Next, I will be moving home-repair stuff from the garage.

 

Wrap Up

This got really long, but a lot gets done on a full week stay-cation. I hope to get after the big black rollie cabinet and the garage-to-tool-shed over the next couple of weeks. Then, our summer project will have been completed before summer even arrives. We all know nature hates a vacuum, so that time will be filled by something. And that something will probably be either home improvement or car-related. Once that happens, I'm sure I'll post about it. Until next time, thanks, as always for following along-