Showing posts with label Timberline. Show all posts
Showing posts with label Timberline. Show all posts

Tuesday, April 22, 2014

Timing your Purchase

A friend of mine asked me about getting a VW bus this past week.  I thought I'd do a little post about what advice I gave.  T and I spent Saturday playing in the snow on Mt Hood, so I'll write a little about that too.

Spring in the Air, Snow on the Mountain
This has been one of the weirdest ski/snow seasons I can remember in the Pacific NorthWest.  We had virtually no ride-able snow until after the Winter Solstice.  SkiBowl wasn't officially open until well after New Years Eve (and they've been closed since the first weekend in April).  After a lame early and mid-season, the late season snow has really been coming on strong.  I'd seen that Timberline had been getting consistent snowfall last week, so after hosting a family friend from Australia and helicopter-parenting C to an 8:AM lacrosse game, T and I spent Saturday on the mountain.  The roads were wet from the steady rain, SkiBowl looked like late Spring and the Summit ski area looked like a spring meadow.  Our expectations for sliding were quite low.  As we ascended Timberline Highway, though, the rain slowly gave way to wintery-mix and then a steady snow.  The parking lots were nearly empty, but the falling snow wasn't sticking... to the asphalt.  It was definitely sticking to the slopes.

The smaller terrain parks on Thunder and Walt's Way had been taken down, leaving just the jumps.  So, while the high-fliers and hard-core terrain riders played on the big stuff fed by the Stormin' Norman lift, T and I had Thunder and Walt's Way to ourselves.  Neither of us had been on the snow much since his concussion, so it was really nice to just feel the snow under our feet and hang out together again.  As the day wore on, the snow got better, and the jumps less scary.  By the last run, we were both getting air (T doing tricks, me mid-air panicking) and sticking landings consistently.  It was a great day to play in the snow.

Pick One
As I mentioned at the start, I was asked about buying a VW camperbus.  I obviously love the idea.  There are 4 viable used models to choose from: splitty (T1), bay-window (T2-called "bays"), vanagon  (T3) and eurovan (T4, T5).  They all have their upsides and downsides.  Splitties look neat, but they are the most under-powered and probably the most rusty.  They can be very spendy as collector cars since they fell out of production in 1967.  Bays were sold from 1968-1979 in the US and were the most widely built/sold around the globe.  They were manufactured through 2013 in Brasil, making part availability unequaled.  Of the 4 styles, these are probably the least expensive.  The vanagon (1980-1990) is probably the most roomy, or at least it feels the most roomy, and is more powerful than most bays.  Called water-leakers by many, the early cooling systems are prone to rusting and failing.  Still, the Synchro (all-wheel-drive version) is really cool, and the camping portion of the vanagon is well done when compared to the bay (especially the early bays).  The Eurovan (T4 1990-2003, T5 2003-current) doesn't feel like you're driving a bus, but the interiors are very nice.  It could be the most reliable on the day of purchase, but also the most expensive to maintain, and it still feels like a standard mini-van behind the wheel.

When to Buy, When to Sell
Once you've chosen a target vehicle make/model, the next most important step is deciding when to buy it.  While this may not seem terribly important, it very much is.  You could considerably overpay if your timing is wrong.  I'm kind of a used-car market geek, trolling craigslist and eBay alot, and I've noticed distinct patterns.  We are entering the worst time of year to buy a car.  Car dealers hold "dad's and grad's" sales, so you'd think there would be excess inventory they are selling off.  In reality, there are lots of buyers in the market heading into Summer, and the car lots are trying to get those shoppers.  Who doesn't want a new-to-them car to play with all Summer?  Lesson to shopper: wait.  Wait until July when the price spike starts to pass.  As Summer wears on, prices drop until they bottom out in October.  By then, anyone who wants to get rid of a car before Winter is willing to take a loss rather than store it.  What remains after mid-October are cars held by sellers who think their car is worth more than it is, or very unusual cars which hold their value, but are only interesting to a niche market.  Over the Winter, the supply is thin so prices stay somewhat stable; not at late-Summer deal prices, but not as high as late-Spring either.  By March, prices start to climb again.  So, if you want to buy a bus, wait until the end of the Summer when the last guy who had that dream has decided he doesn't want to deal with it over the Winter.  Deal for you, and they found a new loyal owner.

That's it for today.  Sorry I didn't have any pictures of us playing in the snow.  We were too focused on enjoying the conditions to record how good it was.  Seriously, there's still snow in them thar hills.  Go play while you still can!

Saturday, August 17, 2013

Rack 'em, Snow Bum

Sure, I know its August.  Yep, most folks are taking vacations or at the least thinking about the sweltering heat.  Even here in usually-temperate Oregon, the humidity has been over 65% (which is downright humid for these parts in August).  Sweaty.  It reminds me of my old lawn-mowing days in upstate New York with 80%+ humidity, 80*+ temps.  To combat the weight of the dog-day heat, I think cool thoughts.  T and I will talk about the drop into the bowl on the Thunder run at Timberline or Ski Bowl's Lower Surprise trail.  It's funny how talking about losing an edge and cartwheeling downhill in deep powder can cool you off.  I spent yesterday afternoon in my 90* garage building a ski/board rack for the bus.  I'll detail that today.  Stay cool my friends.  2013-2014 Fusion season passes go on sale in less than 3 weeks (Sept 3rd!).

Starting with What?
thinking about it
The bus was a 1972 Westy when I first bought it.  It ran a 1700CC air-cooled non-original engine with a Weber 32/36 Progressive carb, 009 dizzy and a worthless heat-exchanger exhaust (65HP, 18mpg @best).  It had the original 1972 Westvalia interior and canvas bellowed pop-top.  Today, it runs a 1.9L TDI from a 1998 New Beetle (90+HP, 30mpg).  Inside, it has the rock-n-roll bed, rear closet and refer cabinet from a '79 Westy plus a middle row seat from a Vanagon.  Up top, it has a 1972 Riviera (straight up) poptop and bed.  That may sound crowded inside, and it can be.  Since I've been working on the engine, I have had the rear closet (left side with a front-facing door and cubicles at the rear) out of the bus and sitting in the garage.  This leaves the engine electronics, which sit in the spare wheel well, exposed.  I have a solution for that, but that's for another day.  Anyway, I started looking at the 14" gap between the left side wall and the middle row / rear seat, thinking.... "couldn't we put our ski stuff there?"....

Think, Measure, Think
aligning the rails
I started simply by setting a shoe box on top of the refer cabinet and putting my snowboard on top.  Surely I could make something work there.  I grabbed a set of skis and held them above.  "Yep, I should be able to make 3 racks, each holding either 2 boards or 2 sets of ski's," I thought.  The racks need to be far enough apart so snowboard bindings fit between them, but close enough together so our youngest ski's fit.  That last part proved too much, but he needs new planks anyway, so it should all work out.  Holding the ski's in the air, I made pencil marks on the wall to give me a sense as to where the rails should sit.
I wanted the rack to have some give, so I chose to connect the rails to the side supports with hinges rather than angle braces.  On the other end, I thumb-screwed eye-hooks so we could pull one-to-all of the racks upwards, suspended from another eye-hook in the ceiling by a length of chain.  I haven't completed that part yet.  Last, the equipment needs to stay put.  To address that, I replaced one hinge wood-screw on each rail with a eye-hook bolt run through to the bottom.  On each rail, a 12" bungee is attached from hinge eye-hook to rail-end eye-hook.  I am waiting for the arrival of some bath-tub tread material that I will apply to the rails to make it complete.
parts list

Material List
2 6' lengths of 1x3 cedar for the side supports and rails.
3 packs of 2" utility hinges (2 in each pack)
3 packs of #8-32 x 1-5/8" eye-bolts (2 in each pack)
3 packs of #208 Screw Eyes (2 in each pack) - for rail ends
1 pack of #206 Screw Eyes (2 in pack) - for ceiling
1 8-pack of mini bungee's
some #10 washers

Cuts and Drills
I started with a clean-up cuts on the ends of the cedar.  Lumber yards don't make perfect square cuts, so this is always a good idea.  I cut 2 24" long pieces for the supports and 6 12" long pieces for the rails.  I set one of the supports against the sidewall to consider rail placement.  To make it simple, I pressed the support against the headliner support.  I transferred the pencil marks on the wall to the support. Recognizing that we need 9" between each rail (our tallest binding was 4-1/2"), I lined up the rails 9" apart, adjusting the pencil marks.  Once I had a plan, I set the support back against the wall, held the rails up to see how it would feel.  Then, I pre-drilled the holes for the hinges (making one on each rail large enough for the eye-bolt) and assembled.  I also pre-drilled holes at the top and bottom for wall-mounting.

Installation
testing installation
Once the rack was put together, I wanted to see it in-place.  I discovered that the bottom rail was so low that I had to remove the eye-bolt so the hinge would open enough for me to access the mounting holes.  Hmm.. opportunity for model improvement.. I pre-drilled one hole in the wall and mounted the rack with a 1" sheet metal screw.  This held the rack in place so I could pre-drill the remaining holes without the rack slipping.
A test installation wouldn't be complete without filling it with snow equipment.  I put 2 boards (mine and T's) on the bottom rack, 2 sets of ski's (K's and C's) and Boo's set on the top rack.  K2 gets new-to-us ski's this year, so I left his off.  With the bungee's, the equipment sits well.  I will apply bathtub treads to help hold things in place, but it looks like the passengers will be comfortable and safe, and the equipment a-fixed.

That's it for today.  I still have some clean-up to do, but in just 4 hours this went from concept to installed.  We may use the racks as garage wall-mounts too.  Each one attaches with 4 screws.  Neat.  More next time, and thanks for following along-

Monday, August 12, 2013

bum buh NAH!

In my last post, I talked about getting the coolant to stop dripping.  Today, I'll briefly cover the test flight.

Re-Assembly
rare August rain approaches
Sometimes, when you put a project back together, you almost know it isn't right.  The re-assembly seems to take a little longer, parts don't fit together as easily.  Its almost like the repair gods are trying to tell you "don't bother, you got it wrong", but we press on.  Other times, the re-assembly is flawless.  The hoses just line up, the parts simply click together.  The re-assembly of the bus after trying to fix the coolant leak ran the spectrum.  I got to where I couldn't trust the re-assembly ease as a barometer for when my repair was crap.  So, this time, when everything just fit (I didn't drop any fasteners, and the engine started on the first touch with the key, etc ), I didn't trust that nodding, "oh yeah" feeling.

Taking Flight
I didn't drive very far.  In fact, I didn't actually leave the neighborhood.  Amid cheers from the boys, I drove out the driveway, and down to the end of the street, turned around and backed back into the driveway.  All told, including just letting the engine idle, it took me 15 minutes or less.  The engine didn't get up to normal operating temperature, but in the past it didn't need to for the stream of coolant to appear behind the bus as I drove.  This time.. there wasn't a stream.  There were no well-spaced drips.  There was nothing but dry pavement... and more cheers.  This time from me.  "bum buh NAH!"  we have success!

Bath Time
afterbath
So, after so many months of not operating, the boys wanted to give Hapy a bath.  We played with the hose and some soapy water and then let Hapy sit in the sun drying for the afternoon.  All the windows were open, the pop-top open and they clambered around inside like they were half their current ages again.  There are few things like a microbus for a fort when you're a kid.

So that's really it for today.  I plan to drive Hapy to work a couple/few times this week (with the life-raft bike in the back just in case) to verify the cooling.  I'm very optimistic.  He hasn't been this dry since I first installed the engine with Justin's engine harness.  The boys are already talking about taking the bus to the mountain this winter.  Fortunes can turn that way, I guess.  I suppose I should start thinking about how we should carry skis and snowboards next :)

Sunday, March 3, 2013

That Familiar Feel of Snow

You may be happy to know that my blog hasn't been the only thing I've neglected over the last couple of months.  Today, for the first time in over a month, the family and I hit Mount Hood.  I'll touch on that and the latest page in the saga of my Jetta.  No bus news today.  I was going to test drive him this weekend, but I focused on other things instead.  If I have a dry and uneventful morning this week, I'll drive him to work as a test flight.

Flash Lives
Poor Man's Ramp
First, some context.  The symptoms were simple: little power, hard starting, seemingly no turbo and black exhaust.  For codes, I was getting a P1556: low or inconsistent boost.  Yep, the turbo wasn't kicking in properly.  Now, based on the days when the turbo wasn't kicking in on the bus, I knew the sound of a turbo firing up, but not boosting.  That was the sound I was hearing.  On Saturday, I prepared to get the Jetta (Flash) operating right.  Since I'm without a place to work on it, I set up on the street, using the poor-boy's ramp: the curb.  Once the engine is running, crank the wheel all the way so that the back of the front tire is facing the curb.  Then back-up.  Simple.  I slid under Flash and verified the connections from the turbo to the intercooler were good.  From the top-side, though, things were sideways.  The hard-pipe coming out of the intercooler was loose and grinding against the coolant pump.  We have our problem.  I drove it to Johnny, showed him the evidence, and he fixed it.  He did my rear brake pads too, and didn't charge me for either.  Thanks, Johnny.  Flash runs awesome.  Now, I need a pair of tires, and he's ready for another 40k+ miles.

Snow
C resting mid-Molly's
I hit Timberline with my boys and Boo today.  She couldn't slide, needing to grade student work unfortunately.  Turned out C had left his boots at his mom's house anyway, so he went in Boo's (they have the same size feet).  The snow was hard-packed with about 1/2 an inch of puff on top.  It was fast, but the crashes were painful.  I only spilled a couple of times (once on my helmet-protected skull, trying to follow C off a jump).  It really was what my mood needed, though.  There is nothing like a day of playing with your kids.

I Know that Feeling
We left the mountain in a bit of a rush.  T & C were due back at their mom's, so they left in the lead car while Boo and I arranged the ski equipment into the larger carry-car.  As we made our way off the mountain, we discovered an ice-patch.  Ahh... I haven't lost traction on slide-y stuff in years.  Funny how the old skills kick in, though.  Total calm, turn into the skid and lightly tap the brakes.  We righted our descent.  No side-rail impacts, no nerves even, really.  Oddly enough, the car behind us didn't hit the ice, nor were they deterred in their close traveling distance.  Bah!

That's it for tonight.  Have a great week, and thanks for following along.  I'll try to get back to this posting with a couple pictures...

Monday, November 26, 2012

White Friday 2012

First, to my readers from the United States, I hope you had a pleasant Thanksgiving full of your favorite delights.  I enjoyed family, food and football.  Watching the Lions finally win and the Cowboys lose to the Redskins were especially enjoyable.  I regret, however, that I was unable to get the bus operational in time for White Friday.  Again, the battery has inexplicably drained, and my charger is back in the storage facility.  I'll need to charge or jump the bus back to life and then drive around a bit before taking the journey to Mt. Hood.  I did celebrate White Friday at Timberline as planned, though, and I'm going to focus on that instead :)

Rain? What Rain?
Mt Hood Hwy
Starting on Monday, we watched the weather forecasts and snow reports.  Every one of them had some form of drizzle in the plan for White Friday.  I thought for sure that we would have a grey one instead.  All reports had the rain starting around noon, so Boo and I got ourselves out of the house early.  Well, it was early for us on a weekend day- 9:30AM.  Driving Flash with gusto, we got to Timberline before 11.  When you arrive at Timberline, you pass the overflow lot first.  This is usually your early signal of how busy the resort is.  Last year, for example, the overflow lot was almost completely full, and the runs were too.  This year, however, there were less than 2 rows of cars in the overflow.  Once you round the corner from the overflow lot, the main lot is visible on your left.  The main lot was less than half full.  Apparently, everyone else heard the rain threats and gave up on the snow.  Sucka's.

... and then there was sliding
mid-run under the Molly's lift.
Mt. Jefferson deep in the background
The upper mountain (Magic Mile and Palmer) was closed due to lack of visibility.  The clouds were low, but the wind was too.  Most of the lower mountain (Bruno's, Pucci, Molly's, Stormin' Norman, Jeff Flood) was open, though, with just Jeff Flood closed because it is the lowest of them all, and those runs were too soft.  Early season brings a funny split crowd.  There are a group of snow junkies who are quite good and a group of brand-new-to-the-sport folks.  On Friday, the junkies mostly went over to Stormin' Norman for the grind rails and jumps and the newbies stayed mostly on the beginner slope Bruno's.  This left the Pucci and Molly's runs lightly populated, leaving Boo and me some open terrain for fun.  The queue for the lifts were maybe as long as 5 chairs long at the peak with some runs ending with no line at all.  The snow was relatively well-tread, but there was an inch of puff on top and plenty of fluffy off the main trails.  We bounced through un-groomed moguls near the top of Pucci, raced down the Thunder bowl and carved Vicky's Run before stopping to meet my brother E and his daughters K&K for lunch.  E, K&K don't slide, but they love the snow.  They drove up just to visit the white stuff, make snow forts and sled.  After a brief visit, they headed for the out-of-bounds and Boo and I went back to carving.  After 9 or 10 runs, we called it a day.  No rain.  It was actually quite nice.

That's it for today.  I hope you all found a way to celebrate White Friday.

Sunday, November 11, 2012

Weather Whether Whatever

Yep, its been a month.  I really don't know where the time goes.  When I look at my calendar for that past month, its been all over the place, so I can't point to one thing as my time killer.  I think its simply working too much.  I have had some time playing with the bus.  Boo and I hit the mountain for the first time yesterday, so I'll hit both of those today.

Whether Weather
When I first pulled the electronics together for the bus, I positioned the throttle unit (resistor pack that sends desired speed to computer) under the floor.  This area is protected by a square-ish pan with a couple of silver-dollar-sized machined holes that is supposed to be held on with 6 6mm bolts.  My bus being 40 years old, and having had multiple owners clowning on it, those bolt holes are not dependable.  For example, when I drove to the Futhur show I could hear the pan rattling in the wind.  Yikes.  Now, add the incessant rain we experience in the Pacific NorthWest and the sensitive electronics contained within.  Clearly, the bus was not ready for Fall, Winter and Spring.
First, I closed the machined holes with noise-reduction material.  This reduced the ambient noise as well. On top of that, I glued-in thin closed cell insulation for more noise containment.  I then ran 3/8" window insulation along the lip of the pan.  These 2 efforts solved the water problem, but I still had to get the pan attached to the bus such that the insulation would compress.  Since the bolts were rattling around the holes, I went to Home Despot and bought a handful of every bolt size from 6M to 8M in both metric and US sizes.  None of them worked.  So, I switched it up to thick (size 16) sheet metal screws, and sent one through the front-center and one through the rear-center.  The pan sealed right down and compressed the insulation.  Nice.  I tested the edges with a thin screwdriver, and I was unable to press past the insulation.  Problem seemingly solved.

I apologize for my lack of pictures.  The belly pan work was performed without the benefit of adequate light, so there were limited opportunities for taking pictures then either.  It looks like the drizzle has finally ended, so I'm going to head outside and address the turbo outlet that seems to loosen almost every time I drive the bus.  Once that's done, I just need to solve for the rear cabinet and protecting the electronics hidden underneath it.  Then, the bus will be ready for taking the family to the mountain regardless of the weather.

from 2011-2012 season a-top Palmer
Sister Hood
If you've read this blog long enough to have read entries from last Winter, you're already pretty well aware of my love of snow.  Season lift tickets went on sale a few weeks ago, and I outfitted the family with passes.  Of course, the kids keep growing, so 5 out of 6 of us got new boots (even me; mine were shot), and we spent last weekend at Next Adventure getting extra snow pants, a jacket or 2, etc.  As I write this, I'm starting to figure out where my month went... anyway, Boo and I took a test-flight to Timberline yesterday in my Jetta (bus may go next time).  T-line always has the glacier to slide on.  They call it the Palmer Snow Field; I call it the Palmer Ice Sheet, but either there was snow on Thursday, and it hadn't warmed above freezing since.  As we drove through Government Camp, all the trees had a light snow-dusting on them.  SkiBowl has a couple of inches and even Summit has some.
The road to Timberline was snow covered, but sanded.  We realized our chains were still in storage, so the slight drifts we experienced had us a little on edge.  Still, we made it to the parking lot unscathed.  It was cold.  I mean cold cold.  Almost 0*F cold.  And a wind.  Take the cold and the wind, add that you're suspended in a chair 30' above the ground (and above the tree-line) and finally add that this was out test-run and we both inevitably forgot something.  We couldn't stay very long.  We got 2 runs in and called it a successful test.

That's it for today.  I hope to have the bus winter-ready by ThxGiving so we can take the bus to Timberline for White Friday.  It would really make my season if I could bring my 2 favorite things together.

Sunday, April 15, 2012

... and a Stella at the Stube

Today is all about weather, sliding and moving my bus around.  No new work, but I have a couple of codes to chase down.

Spring has Sprung
It is definitely Spring in the Pacific NorthWest.  The temperature has risen into the 50's(F) during the day and we're enjoying that donut-hole of dry weather in the middle of our typical wet season.  If you don't live here, the rumors of our rains are generally true.  The "spring" rains start in February and continue nearly unabated until Independence Day.  There is one exception to this: April.  Since I moved here 20 years ago, a hole in the wet season has appeared covering most of the month of April.  Last week we entered April, and the hole hasn't been as pronounced as other years.  Since Spring Break has ended, and the kids are all back at school, it seems yet another creul joke has been played upon them: Rain for the week they're out of school and the second week back it's in the 60's(F) and dry.

T Birthday? T-line
It was T's birthday early last week, so Boo and I took the whole brood of bears up to Timberline on Sunday as an early celebration.  The conditions were really good.  By this time of year, you start expecting Spring (a euphemism for bad) conditions: slushy, bare patches and generally slow.  Timberline, however, had very good conditions, especially further up the mountain on Magic Mile.  The snow was powdery and there was hardly any wind.  The rest of the mountain was okay, but there were slow spots.  The bigger boys played on the terrain parks, and had great things to say about the jumps.  Across the resort, though, the place was not busy.

... and a Stella at the Stube
riding Pucci lift
Yesterday, neither Boo nor I had our boys, so we took a late run up to the mountain for some afternoon snow.  Unlike the week prior, Magic Mile was the worst snow of the day: heavy winds made getting off the lift almost dangerous.  The granular snow wasn't much fun for sliding either, but it was fast!  We spent most of our time working the slopes feeding into the Jeff Flood and Pucci lifts.  There was a new half-pipe at the top of Pucci that we didn't see until it was our last run, unfortunately, but that will bring us back next week.  Timberline closed the mountain at 4, but we'd only had a few hours of snow-time, so we packed up and drove the 20 minutes to SkiBowl.
Rather than jump right into any "should we slide" decisions, we hit Beer Stube and grabbed a couple Stella's.  We watched fellow snow-lovers work their way down the lower bowl face and the rail-riders in "Jesse' Flight" terrain park from our window seats.  One beer later, and we decided we'd take a couple runs.  We did Random on the Upper Bowl face and discovered a new large jump terrain park at the end of Dog Leg.  I tried the first jump, had bad body position on my board and landed flat on my back.  I finished the run and took 2 more, wanting to conquer the jumps.  Ultimately, those really large jumps are more that I should be starting with.

TDI Codes
So, with all the fun snow out of the way, I mentioned the shift linkage in my last post.  The linkage is still held together with a zip-tie.  I'm only driving the bus around 200' every other day lately, though, so it isn't a big deal.  I'll explain the 200' thing another day.  Today, let's hit the Check Engine Light (CEL) codes that are being thrown by the computer.
First, I'm getting a P1403 which decodes to "Exhaust Gas Recirculation System 17-00 Control Difference Readiness: N/A".  Since I blocked off my EGR system (its a '72, so no smog test, the EGR clogs the intake with goop and I run B10, so my emissions are still better than the old '72 engine was), this code should be expected.  I can get a computer modification (aka tune) that deletes the EGR, but that's money, or I can ignore it.
Second, I'm getting a P0380 which decodes to "Glow Plug/heater Malfunction".  Yeah, I've seen this one before.  Either the glow-plug harness has become unwired again or some other wire bit has broken free.  Regardless, neither are a big deal, especially as Spring approaches and glow plugs aren't really going to be useful for a while.

Monday, February 6, 2012

Mopping Shop and Eating Crow

Being Monday, today is all about updating what happened over the weekend.  I was able to test drive the bus,  take a run at the mountain, work on the cooling system some more and even watch a little football.

Mopping Shop
Well, as you may expect from the sub-heading here, the test drive got a little, uh.. wet.  Like my prior attempts to drive the bus, I had all the usual trappings.  Everything seems fine, and then its not.  I started him up, checking for leaks and for air bubbles in the overflow bottle.  Nada.  Then, I drove the bus down to the local 7-11 and picked up a celebratory beer.  Drove home.  By the time I got home, the engine was warmer, and the coolant started to leak.  I parked him in front of my place and like a nervous puppy, he formed a puddle underneath.  Drat.  I proceeded to mop the garage floor where he is usually parked and backed him in.  I slid a pan under the drip, went upstairs with my now-conciliatory beer and watched the Blazers beat the tar out of Denver on tv.

View of Mt. Jefferson
from the top of Magic Mile
Timberline Shines
I awoke to an alarm on Sunday morning, triggering a day playing in the snow.  I grabbed Boo, met my brother in Hollywood and made it to Timberline Lodge by 9:30.  We figured the resort would be less crowded on StuporBowl Sunday, but there were still quite a large number of folks there.  The weather was absolutely fantastic: sunny with a slight wind.  It was cold enough to stave-off the melting but warm enough so you didn't need lots of layers.  Perfect weather.  The snow was pretty packed, but there weren't many ruts and the groomers had churned enough to keep the top fresh.  Everything except the Palmer Ice Sheet was open, though the Magic Mile trails were pretty icy (making them fast and easy to catch edges).  Alpine, Thunder, Glade and Kruser were really good runs, with plenty of open space between folks.  The terrain parks were jammed, but I avoid those anyway.  We played until around 2 when we packed off back home.

Dinner of Crow
I dropped my brother and Boo off at their respective homes and hit the parts store for an o-ring.  I'd come to the conclusion that the leak was caused by an o-ring failure, not a human error.  I got home and my legs declared they were too tired to do anymore.  So, I snapped on the game.  Boo and I stopped for a quick bite at one of our regular spots (Mandarin Palace on the corner of Allen & Scholls Ferry), and I saw the 1st quarter there.  It seemed like it was a decent enough slow-start StuporBowl.  By the time I got home with my o-ring, got my snow stuff into the laundry and the game back on, it was nearly over.  Yes, that was an amazing finish to any football game, and it being the final game of the year makes it all the more impressive.  I watched the post-game interviews and swallowed my crow.  Maybe I'll try to watch the game next year.  It sure would be nice to see a West Coast team in there, though.

More Cooling Surgery
After the game, I took my new o-ring and swapped it into the bus.  This time, I did things a little differently.  First, the o-ring is a little oversized.  The stock part is metric, but all I could find was one in imperial sizes. So, rather than 3mm thick, it is 3.1mm.  Instead of 20mm inner diameter, it is 19.6mm.  You get my point. As a result, the o-ring was snug on the temperature sensor and snug in the flange.  Once the c-clip was back in place, I couldn't wiggle the sensor at all.  I contrast that with the ability to wiggle it enough to make it leak before, and I think I've found the leak source.
Second, I captured the coolant differently.  Rather than try to drain coolant, I caught all of it at the flange during the sensor removal.  Take a clean kitchen garbage bag and push the closed end down from the flange towards the ground.  Wrap the open end around the flange and remove the c-clip.  Pull the sensor and all the coolant goes into the bag.  Put the new o-ring on the sensor, install the sensor and pour the coolant back into the overflow bottle.  In my case, the coolant bottle didn't drain during the work, so I had to start the engine to circulate the air bubbles back into the bottle.  Then, I re-filled it from the bag.  Neat!  And no mess!

I'll test drive when I have some time this week.  Like every other time, it feels like I have it fixed.  We'll see. Maybe this time I actually found and fixed the problem.  Thanks for following along.  More next time..

Tuesday, January 3, 2012

Holidaze, Hood and Harnesses

Its been 10 days, and I've been on vacation for most of them.  I'l hit the highlights, and describe my final engine harness resolution.

Mt Hood Xmas Eve
Holidaze
The miniature house painting, like so many projects I undertake, took longer than I described in my post before.  In fact, it took as long as I told folks in person: over 40 hours.  It still needs to be shipped, so it totally missed the holiday window.  Once its been delivered, I'll post a picture.  My dad says that the Three Kings actually arrived on the 12th day of Christmas (Jan6), not on the actual birth-night like the songs imply.  So.. I'll stretch that so I can have the finished product in-hand by Jan6 and still meet Christmas expectations.  Its all in how you frame it...

Hood
As I write this, I've been to Mt. Hood to go sliding 13 times since the start of the season.  That is more than all of the times I've ever gone in all my previous years combined.  On Christmas Eve and the 26th, I took the boys to Ski Bowl.  After nearly a month without fresh snow, the conditions were really very good.  Ski Bowl has snow-making machines like the resorts in Vermont, so the sub-freezing weather allowed them to make snow almost every day.  This left an inch of top-powder on top of the packed base.  The mountain was practically empty on the 24th and it was almost as quiet on the 26th.  These were possibly 2 of the best days we'd had to date.
Mt Hood from Mid-Reynolds
top at Ski Bowl
We went up to Ski Bowl again on the 27th, but it rained.  I was practically soaked through by the top of the first lift, so I only took a couple of runs and called it a day.  We took the next 2 days off, so our legs could recover, and we had family holiday parties to attend.  Our last trip to Mt Hood was Friday Dec30 to Timberline.  Mt Hood was experiencing blizzard conditions, making the drive a little challenging for some, and the sliding a little interesting for us.
Sunset over Ski Bowl Lodge
The drive to Government Camp didn't require chains, but I pulled over into the rest stop/Summit ski lift parking lot and had them on in a few minutes.  All those early trips gave me lots of chain-up practice.  It also gave me some needed snow-driving practice, which came in handy.  We found a front-row parking spot, set the car in gear (leaving the hand-brake off), and stepped into some of the worst weather I've experienced since moving to the West Coast.  In the time it took to get our gear on I had an inch of snow in my back seat and over an inch in my trunk.  The car was completely covered, and we were all cold to the skin.  We hauled our equipment to the day lodge and set to sliding.  Timberline had at least 16" of fresh powder on the ground and more was pouring out of the sky.  Visibility was about 15' and foggy through goggles.  Still, the sliding was slow with the fresh powder, but that encouraged more direct paths downhill. The spills were all the more epic.
I avoided a young woman who was sliding very slowly down the center of the trail (in an outstretched jumping-jack pose), but ended up hitting the drop-in at the top of Thunder with my body out of balance.  I dropped about 10 feet hit a mogul, bounced, hit another mogul and then cartwheeled twice before landing flat on my back with a thud.  If the 16" of powder weren't there, I would have been hurt.  Instead, I caught my breath, checked my extremities, jumped onto my toe-edge and finished the run.  Good times, and more to be had for sure this season.

Harnesses
wires don't go to the same pins
So, I bought a replacement harness.  It wasn't the right one.  I found the part number on the ECU plug and bought a replacement off of eBay.  It looked right, but once I unwound the tape and pulled the dust cover off the back, it was clear that it wouldn't work either.  The picture here shows how the wires don't route to the same pins.  So, even though the part number was right, the implementation was different enough to make the part useless to me.  One more thing to sell.  Great.  So, at this point, I got a little creative.  I looked at the pin-holes that click into the ECU on both the old plug and the replacement.  It looks like the inside of each of those little holes contain a metal clip.  I figured I probably damaged or bent the clips with my connectivity testing.  Next to each square-ish hole is a tiny slot.  I found a tiny paperclip and started working the holes where I could see the clips. I did this on and off while watching football, so I'm not sure how much time this took, but it was more a case of move slow, than bang-it-out.
plug underside
Once the holes looked more like the plug I bought, I took the harness downstairs.  First, I tested the loaned harness with the OBDII trip computer.  I had only one code: P038 - Glow Plugs.  I pulled the loaned harness out, shot every plug on the original with Di-Oxit5 and strung it into the engine and ECU.  Quick test with the OBDII computer and I only had the one code.  Hazah!  I tried to start the engine and it wouldn't start, but its because I hadn't fully primed the fuel circuit.  I'll be completing that this week, and I should be able to drive the bus again.

Well, that's like 2 or 3 posts in one.  There's so much sliding season left, I expect to have lots of outdoor pictures and experiences to share over the next few months.  It seems like the bus is almost road-ready again after a 3 month span.  I plan to prime the fuel circuit this week and he'll be ready.  When he drives again, he'll have a completely refreshed fuel tank, a fan on the intercooler, an operating glow-plug circuit, a freshly painted exhaust and studded snow-tires.  Wow, when I spell it all out, its been a very productive 3 month lay-over.  Like every other time the bus goes back into service, I'll start a list of things I want to work on the next time.  If it goes well, I won't plan for another run of projects until May when the ski season is over but camping season hasn't started yet.  As always, thanks for following along, and I'll post again soon-

Thursday, December 1, 2011

White Friday

As I've mentioned before, my boys and I have a tradition we started a few years ago (Holding Pattern taking Hold) where we get some snow time during the ThanksGiving break rather than retail time.  On that first holiday weekend, we went on Saturday, but in the last 2 years, we've gone on the day after ThanksGiving.  The newsfolks (and far too many people, in my opinion) refer to that as Black Friday.  The ruckus leading up to ThanksGiving about what sales are where and who's going to have the biggest lines completely blots out the whole being thankful message of the season.  So, to give the sickening consumerism the finger, we get away from the stores, the televisions and the crowds (presumably) and head for the snow.

Departure
My boys slept in.  I told them I wouldn't wake them as a means of getting them to go to sleep ThanksGiving Night, but the excitement of going to the mountain on opening weekend was too much for them.  I finally awoke them around 9.  Since the lifts opened at 9:30, and we were still in Beaverton, we clearly were not going to be there for the first lift.  No matter; both of my brothers were going to meet us up there, and they both have little ones, so we figured they couldn't actually beat us there.  A quick-slam breakfast and we hit the road.

White Friday
We tried a weird longer route, but we got there by 11:15.  The traffic to the mountain was steady.  The climb up Timberline Hwy required chains.  The parking at the lot was to overflow and there were sizable lines at the lifts.  Considering it was considered the beginning of unbridled consumerism season, the turnout for White Friday was fantastic.  Then, came the conditions.  The snow was powdery.  The air dry, the visibility infinite and the winds still.  Perfect day for playing.  C got separated again, so we spent time looking for him at one point, but he wisely realized he was in the wrong spot and stayed put.  We met both of my brothers' families and visited in Wy-East, then headed down the mountain to Summit for some sledding before dark.  We ended the day saying our goodbyes in the Summit Lodge after hot coffee / cocoa.  Perfect White Friday.


I hope you take the opportunity to celebrate White Friday next year.  The retailers will survive without you, but can you survive the retailers without first giving yourself a break?  Go to the snow, play with your kids or your friends and breathe in the crisp fresh air.  The malls will be there for you later.


The bus progresses.  I'm waiting for a replacement engine harness so I can return the borrowed harness to Justin.  I bought some used snow tires too, so we'll be able to take the bus up to Government Camp / Ski Bowl this winter.  I'm not quite daring enough to try Timberline, but we'll see.  Thanks for following along, and I'll post again soon-

Tuesday, November 22, 2011

Taste of Winter

I haven't really been paying any attention to the weather beyond the Great Pacific NorthWest.  Like so many folks, I get caught up in what's happening in my life or immediately around me and just don't look up.  So, for those of you suffering with floods, power outages, freak freezes or blizzards, I hope your troubles end soon.  For those of us in the Great Pacific NorthWest, Summer switched to Fall and then to Winter rather quickly.  I'm going to talk about my trips to the mountain over the past few weeks today, and take a short break from my postings about the bus.

November Snow
view out bar window
Mt. Hood is home to as many as 6 different ski areas.  At its peak, there is a glacier providing a surface for sliding nearly all year 'round at Timberline.  Sliding on the glacier (Palmer Field), though, is really not that great, unless you like sliding on a sheet of ice pellets.  Yuck.  Still, if you want to slide in the first week of  November, you have few alternatives.  We have been fortunate, though, and the top of Mt. Hood got a bunch of snow the last week of October and the first week of November, so it wasn't all ice.  Boo and I only took a couple of lifts before they closed them for the day, but we got to try out our new passes and her new skis.

Timberline Lodge
The ski-part of the resort wasn't really open yet.  We walked through Wy-East Day Lodge on the way in, and it was still actively being remodeled.  The entire food court area was a construction zone.  So, once the lifts closed, and we took our final slide down, we visited the main lodge.  The main lodge was in the movie The Shining as its greatest claim to fame.  It was built as part of a WPA (Works Progress Administration) in 1936.  The woodwork is pretty amazing, with exposed timber structures across the ceilings.  There is a massive central smokestack serves 8 fireplaces on 2 floors.  We hit the Ram's Head bar on the upper floor, found a table by the window and watched the snow.. with a couple drinks.  Great way to end a day of sliding.

7 Days Later
Timberline Hwy
A week later, we took the boys up for a day on the mountain.  Unlike the prior week, this time the wind was so strong at the top of the mountain, Palmer Field was closed.  In fact, the only open stretch of snow (and corresponding lift) was the bunny slope between the parking lots.  Had it been mid-season, and SkiBowl was open, we would have gone there.  Instead, since the season wasn't even open yet, we played on the bunny slope.  C strove for the highest number of times around and counted 29 runs in the 2 hours we were there.  Clearly, C got very comfortable with his new skis.  T used his old board, but felt like he was back to mid-season form by the end of the day.  They shut off the lifts at 2:30 again.

Uno Mas
The following Saturday, this past weekend, Boo and I went up again.  This time, Timberline had a 54" base including over 10" of fresh powder.  Almost half of the runs were open and one of the other major resorts (Meadows) opened.  The opening of Meadows probably accounted for the light crowd at Timberline.  The snow, though, was incredible and the visibility was fantastic.  I hadn't really seen much of Timberline's runs, and even now I've only half.  Still, the sliding was amazing.  I fell a bunch of times, so I was clearly trying hard enough.  After 3 hours, my legs were burning.and I had to call uncle.  It wasn't until I het the gym yesterday that the pains finally went away.

White Friday
looking down the valley near Govt Camp
In years past, my boys and I would celebrate the Friday after Thanksgiving by going to the snow.  We call it White Friday, in a response to the Black Friday capitalism-on-steroids media circus which seems to lock-grip so many Americans.  Rather than "fighting prices", we'll be fighting gravity.  I strongly encourage you to do the same.  The crowds are smaller, the air is better and it'll probably cost you less.

Anyway, thanks for following along.  I'll follow up next time with a bus update.... and probably more stories from the snow.