Today's post will cover my mother-in-law's (MIL) arrival, a few events since then and a quick visit into the wiring. Last, I have some decisions to make about where to put / how to use the donor dash pod.
First, some of the things I ordered have started to arrive. For example, the belt for the alternator / generator arrived last week (I posted on that before), so that's now in-place. On Thursday, the battery isolator arrived. Still in-transit is the battery fuse-block. Once that appears, I should be well positioned for getting the primary electrical connected.
Marianne arrives
Saturday was a typically crazy day. T had a 9:AM lacrosse game. C was picked up by a friend for an overnight on the Oregon Coast. A new tv we had ordered (and paid for with our taxman refund) arrived and was installed. Marianne's plane arrived early (shortly after noon), and my whole family came over for a big Italian feast. It was nice to have the family over. My brothers both have little ones and my older brother has a step-daughter too, so we have about 14 in total. Marianne made her secret-recipe (her father's) meatballs, and we all ate too much. Good times.
Mom's Day
I had arranged for the boys to make cards this year, so both my wife and my MIL were greeted with cards when they awoke. Knowing my wife is up too early to try to make breakfast-in-bed, I'd prepared for a picnic lunch after church. Instead of going to a park, though, we picninc'ed in the backyard so Marianne wouldn't tire too much. C arrived after the picnic, but his bouncy energy was felt immediately. I kept the boys distracted so my wife and MIL could watch a movie undisturbed, but I was still able to get about 45 minutes looking at the wiring harness. Good thing the weather was as picture-perfect or I would have been "distracting" more interactively inside. Instead, it was just a matter of keeping all questions going through me while they played outside.
Spaghetti and Oil
I've already posted about some of the success I've enjoyed with the 2 main engine harnesses. There are still a few connectors on those harnesses that I can't trace to a purpose, but I suspect they will become clear eventually. I also noted that I had some connectors in the engine compartment for which I did not have a corresponding wired plug. Fortunately, I tagged every plug I could last November, so when I pulled out the main harness, I found the 2 I was missing: the coolant level plug and the coolant pressure plug. The trick was going to be getting these plugs into the engine compartment without having the entire trunk in there.
I started working the trunk (main harness) on Sunday with a pair of scissors and some wire cutters. Since a bunch of engine oil got on the harness during shipping, it was pretty messy, but I was still able to identify clusters of wires I didn't need and remove them. "How?" The first cluster of wires was related to the in-dash stereo components. There were plugs for the stereo and the CD changer, for example. These were not to be re-used, so I un-wired them back to the main trunk. Then, there was the AC controls, and then I started on the exterior lighting. The lighting was a little tricky because so many of the donor plugs were left unlabeled. It turned out, though, that I was able to trace many of the wires through the main trunk and out the other side to where the wiring headed to the rear of the donor vehicle was cut. That iced it.
Within 45 minutes (or maybe an hour) I had removed over 3 pounds of wire from the main harness. I know there is considerably more I can remove, like the rest of the exterior lighting, any interior lighting, window and door lock controls, etc. Once all of the accessory items are gone, I will have (a) a much cleaner harness and (b) many many feet of donor wire in all kinds of colors and thickness to extend things like the coolant level sender circuit. The next time I can get out there I hope to finish the harness clean up. If time allows, I'll start the plug extension after that.
Dash Pod Decisions
During a quiet moment, I pulled out the donor (1998 New Beetle) dash pod and sat it on the steering wheel. It doesn't look like it will fit in the original dash pod hole without some modification. I tried placing it on top of the dash, but it blocks too much view, even if I place it in the center. I looked at placing it in the center of the dash where the stereo sits, but that would take some hacking too. So, I'm now leaning towards leaving the old dash pod in place and stashing the new one under the rock-n-roll bed. This leaves an open question about the VSS (Vehicle Speed Sensor). If I'm not using the NB dash pod, I don't need that speedometer to work. Since I'm not putting in cruise-control, do I need the VSS at all? Same goes for changing the fuel level sensor. I will need to do something for a tachometer, but putting the NB dash pod out of sight is a game-changer..... and it significantly reduces the amount of work I need to do to be road ready.
More next time. I welcome your input on what purpose the VSS will serve if I don't use the speedo nor the cruise control system.
This blog is dedicated to the work that I perform on my VW Bus, the trips we take with him, and the things we see and learn about cars, people and ourselves along the way. That said, I am working on other cars a lot lately. So, I post on that too.
Showing posts with label VSS. Show all posts
Showing posts with label VSS. Show all posts
Monday, May 10, 2010
Saturday, October 17, 2009
tower finished, enter electrical
Today's post will cover our visit to the Oregon Historical Society's Nativ
e Oregonians exhibit, finishing the engine mount tower and some new discoveries on the electrical side. I usually do a couple of hours on Thursdays, but this Thursday I was totally beat, so I swapped this afternoon instead. Here's a picture of the bus with that fancy cover from BusDepot I mentioned in the last post. It has zippered doors for both front doors and on both sides for a slider (UK model has it on the other side). It works great so far. No musty smell, no water. Dandy.
Oregon Historical Society
I had a couple of hours today after returning from checking out the Oregon Historical Society's new Native Oregonians exhibit. The exhibit just opened, and there were native artists on-hand to talk about their work with museum visitors. It was very cool. We learned about how the ceremonial drums are made, and how cooking baskets are used. Of course, there was a large collection of bead work and costuming.
Finishing the Tower
When we got home from the Oregon Historical Society, I got to work on the engine mount tower that Hal has been working on. We agreed that I'd hit it with the grinder the next time I got some time. So, I ground down the "cap" that he welded on at the end of the day last Sunday. I filed on the insides of the uprights where they meet the top and bottom. Finally, I shot it with some blue paint. It should be ready for install tomorrow.
Drive-by-Wire
I mentioned that Hal and I got started on the drive-by-wire last week. I attached a couple of photos of th
e big resistor.
The picture on the right is positioned as if you were looking down through the floor at the top of it. The picture on the left is how it will look from below. It is important to note that we removed more material than we had originally anticipated, so I'm not sure if there's enough left for drilling the holes for mounting. We may have to extend those small silver pieces so we have do. The thing pointing towards the top of the left-hand picture is the "rubber bit" that the accelerator pedal will connect to.
VSS - Vehicle Speed Sensor
I was fortunate enough to find a VSS manufacturer in the Netherlands that was willing to ship one to me here in the states. I got a model 391. Unfortunately, these sensors have the push-on connector and the 1972 VW Transporter has the screw-on kind. I'll be looking into replacing Hapy's speedo cable with one that has a push-on connector -or- figuring out a way of getting the screw-on bit to mate with the push-on VSS. The push-on connector was available in 1981 on the air-cooled vanagon, so it might fit the bus wheel and be long enough to get behind the dash. Time for research.
More after tomorrow's work with Hal. I'm not sure what we'll be working on, but we have the dog bone and the cooling system as well as electrical bits to deal with. I suspect we'll get the engine mount in, and then get the drive-by-wire isntalled. What comes next?
e Oregonians exhibit, finishing the engine mount tower and some new discoveries on the electrical side. I usually do a couple of hours on Thursdays, but this Thursday I was totally beat, so I swapped this afternoon instead. Here's a picture of the bus with that fancy cover from BusDepot I mentioned in the last post. It has zippered doors for both front doors and on both sides for a slider (UK model has it on the other side). It works great so far. No musty smell, no water. Dandy.Oregon Historical Society
I had a couple of hours today after returning from checking out the Oregon Historical Society's new Native Oregonians exhibit. The exhibit just opened, and there were native artists on-hand to talk about their work with museum visitors. It was very cool. We learned about how the ceremonial drums are made, and how cooking baskets are used. Of course, there was a large collection of bead work and costuming.
Finishing the Tower

When we got home from the Oregon Historical Society, I got to work on the engine mount tower that Hal has been working on. We agreed that I'd hit it with the grinder the next time I got some time. So, I ground down the "cap" that he welded on at the end of the day last Sunday. I filed on the insides of the uprights where they meet the top and bottom. Finally, I shot it with some blue paint. It should be ready for install tomorrow.
Drive-by-Wire
I mentioned that Hal and I got started on the drive-by-wire last week. I attached a couple of photos of th
e big resistor.
The picture on the right is positioned as if you were looking down through the floor at the top of it. The picture on the left is how it will look from below. It is important to note that we removed more material than we had originally anticipated, so I'm not sure if there's enough left for drilling the holes for mounting. We may have to extend those small silver pieces so we have do. The thing pointing towards the top of the left-hand picture is the "rubber bit" that the accelerator pedal will connect to.VSS - Vehicle Speed Sensor
I was fortunate enough to find a VSS manufacturer in the Netherlands that was willing to ship one to me here in the states. I got a model 391. Unfortunately, these sensors have the push-on connector and the 1972 VW Transporter has the screw-on kind. I'll be looking into replacing Hapy's speedo cable with one that has a push-on connector -or- figuring out a way of getting the screw-on bit to mate with the push-on VSS. The push-on connector was available in 1981 on the air-cooled vanagon, so it might fit the bus wheel and be long enough to get behind the dash. Time for research.
More after tomorrow's work with Hal. I'm not sure what we'll be working on, but we have the dog bone and the cooling system as well as electrical bits to deal with. I suspect we'll get the engine mount in, and then get the drive-by-wire isntalled. What comes next?
Labels:
bus,
bus cover,
drive by wire,
speed sensor,
TDI,
VSS,
VW
Subscribe to:
Posts (Atom)